Design at Real Size or Scaled
Large jobs are often designed at 1:10 or 1:1 scale. Use Layout > Page Setup and the Scaling options so rulers show the real size.
page size at 1:10 (mm): (300.0, 100.0) | viewing distance 0.5 m -> about 150 dpi at final size | viewing distance 2 m -> about 100 dpi at final size | viewing distance 6 m -> about 50 dpi at final size
These dpi values are rough planning numbers. Always ask the printer for their requirement.
Vector Is Best
- Signs should use vector artwork so edges stay sharp at any size
- If a bitmap is needed, use high-resolution images and check the effective dpi at final size
- Large bitmaps can make files huge
Preparing for a Vinyl Cutter
- Convert all text to curves (Ctrl + Q)
- Weld overlapping shapes that should cut as one piece
- Use Combine so holes are real holes
- Set cut lines to a hairline outline in a distinct color, with no fill if they are cut-only
- Remove duplicates and stray points
- Check the size in millimeters or inches, then export in the format the cutting software wants (often PDF, EPS, DXF or plugin output)
Contour Cut Lines for Stickers
- Select the artwork and use Contour or Create Boundary to make an outline
- Offset the line outward by 2 to 3 mm for a die-cut margin
- Weld the outline into one smooth path
- Put the cut line on its own layer and a spot color named as the printer or cutter asks
Weeding
Weeding is peeling away the vinyl you do not want. Thin lines, tiny islands and narrow gaps are hard to weed. Keep details at least 1 to 2 mm wide for ordinary vinyl, and ask your shop for their limits.
Banners and Vehicle Graphics
- Add bleed and hem allowance as the printer requests
- Keep text away from grommet and hem areas
- Check panel seams on big jobs
- Measure the surface yourself and add overlap
Estimate Material
rows across the roll: 1 | material length: 3.0 m | waste on roll width: 370 mm
Practice
- Design a 600 x 200 mm door sign with text as curves
- Make a sticker with a 3 mm contour cut line
- Set up a 1:10 page for a 2400 x 800 mm banner
- Check for details thinner than 1 mm
Conclusion
Sign work needs vector artwork, correct scale, curves instead of live text, clean cut lines and checks for weeding and material.

