Create a Camera
- Go to Create > Cameras > Physical
- Drag in the Top view to place the camera and target
- Press C in the Perspective viewport to see through the camera
- Move the camera in Front view to eye height, about 150 to 170 cm for a person
- Or line up a Perspective view and press Ctrl + C to create a camera from it
Camera Settings
| Setting | Effect |
|---|---|
| Focal length (mm) | Low = wide view, high = tight zoom |
| Field of view | How much of the scene is seen |
| f-number | Smaller number means more light and shallower focus |
| Shutter speed | Longer means more light and more motion blur |
| ISO | Sensor sensitivity |
| Depth of field | Turn on to blur out-of-focus areas |
| Vertical tilt correction | Keeps vertical lines straight in building photos |
Field of View Math
18 mm -> 90.0 degrees | 24 mm -> 73.7 degrees | 35 mm -> 54.4 degrees | 50 mm -> 39.6 degrees | 85 mm -> 23.9 degrees | EV f/8, 1/125 s, ISO 100: 12.97 | EV f/4, 1/500 s, ISO 100: 12.97
A 24 mm lens sees about 73.7 degrees, and an 85 mm lens only about 23.9 degrees. The two exposure settings have the same EV (12.97), so they give the same brightness, but f/4 has a shallower depth of field and needs a faster shutter.
Composition
- Rule of thirds: place the subject on a third line
- Use leading lines such as paths and walls
- Interior views often use 18 to 28 mm and exterior shots use 35 mm or more
- Keep verticals straight for architecture
- Use the Safe Frame (Shift + F) to see the render area
Practice
- Make a Physical Camera and try 18, 35 and 85 mm
- Turn on depth of field and set the focus on a chair
- Fix leaning walls with vertical tilt correction
- Calculate the field of view for a 28 mm lens
Conclusion
The Physical Camera works like a real camera. Learn focal length, exposure and depth of field, and frame carefully.

