Procedural Maps
A procedural map is generated by math, not by a picture. It never looks blurry, and you can change its settings. Use them for surface variation.
| Map | Use |
|---|---|
| Noise | Random variation for roughness, bump or dirt |
| Gradient / Gradient Ramp | Color blends across a surface |
| Checker | UV testing |
| Tiles | Brick, floor tiles, bonded patterns |
| Falloff | Changes with viewing angle, e.g. fabric or glow edges |
| Color Correction | Adjust the brightness and color of another map |
Use a Map in a Slot
- Click the box next to a property, for example Roughness
- Choose Noise
- Change Size to control the scale of the pattern
- Plug a different map into the color slots of the Noise for more control
Multi/Sub-Object Material
One object can have several materials. Set Material IDs on polygons in Editable Poly, then use a Multi/Sub-Object material whose slots match those IDs.
- Select polygons and set the ID in Polygon: Material IDs
- Create a Multi/Sub-Object material and set the number of sub-materials
- Assign one material to each ID
- Assign the Multi/Sub-Object material to the object
Blend Material
A Blend material mixes two materials by a mask, for example clean paint and rust, using a Noise map as the mask.
Mask Math
mask 0.0 result 0.8 | mask 0.25 result 0.675 | mask 0.5 result 0.55 | mask 1.0 result 0.3
At mask 0 you see the clean material (0.8) and at mask 1 only rust (0.3). In between, the two mix in proportion.
Practice
- Make a tiled floor with the Tiles map
- Add a Noise map to roughness on a wall
- Give a box two materials using IDs
- Use a Blend material to make rusty metal
Conclusion
Procedural maps add variety without pictures. Multi/Sub-Object and Blend materials let one object use several looks.

