What Is a Material?
A material describes how a surface looks: its color, shininess, transparency and texture. The same model can look like wood, metal or glass just by changing the material.
Material Editor
- Press M to open the Material Editor
- Compact mode shows material slots like spheres. Slate mode shows nodes you connect with wires
- Drag a material onto an object, or select the object and click Assign Material to Selection
- Enable Show Shaded Material in Viewport to see textures while modeling
Physical Material
The Physical Material is a general material that behaves like real surfaces and works in modern renderers. It is the usual starting point.
| Setting | Meaning |
|---|---|
| Base Color | Main surface color or texture |
| Roughness | 0 is a mirror finish, 1 is very rough |
| Metalness | 0 for non-metals like wood, 1 for metals |
| Transparency | How much light passes through |
| IOR (Index of Refraction) | How much light bends: glass about 1.5, water about 1.33 |
| Bump / Normal | Surface detail without extra geometry |
Common Recipes
| Surface | Setup |
|---|---|
| Painted wall | Light base color, roughness 0.6 to 0.8, metalness 0 |
| Polished metal | Gray base color, metalness 1, roughness 0.1 to 0.3 |
| Clear glass | Transparency 1, roughness near 0, IOR 1.5 |
| Plastic | Any color, metalness 0, roughness 0.3 to 0.5 |
Fresnel Reflection
Surfaces reflect more at glancing angles. The Schlick approximation shows this.
glass f0: 0.04 | angle 0 reflection: 0.04 | angle 45 reflection: 0.042 | angle 80 reflection: 0.41 | angle 89 reflection: 0.919
Glass reflects only about 4 percent looking straight on, but much more at a very low angle. This is why a lake looks like a mirror from far away.
Practice
- Make a wood, a metal and a glass material and apply them to three spheres
- Change roughness from 0 to 1 and watch the highlight
- Set metalness to 1 and compare with 0
- Set IOR of water to 1.33
Conclusion
Materials define color, roughness, metalness and transparency. Start with the Physical Material.

